Propeller Pump Drives manufactured by Amarillo Gear Company

Propeller Pump Drives

NOTES:
A. Models P3 & P5 have a 100 RPM minimum vertical (pump) shaft speed. For P6 & P8, the minimum vertical (pump) shaft speed is 250 RPM.
B. Models P3 & P5 have a maximum installation tilt angle of 60° from vertical. For models P6 and P8, contact the factory.

**DIMENSIONS**
MODEL	P3	P5	P6	P8
D	11 1/2	13 3/4	17	18
N	3 7/16	4 1/16	5	7
N (3:1 & GREATER)	----	----	----	5 1/2
U	1.999	2.436	3.748	3.998
U (4:1 & GREATER)	1.874	----	----	----
U (3:1 & GREATER)	----	----	3.186	3.748
KW	1/2 X 1/4	5/8 X 5/16	7/8 X 7/16	1 X 1/2
KW (4:1 & GREATER)	3/8 X 3/16	----	----	----
KW (3:1 & GREATER)	----	----	3/4 X 3/8	7/8 X 7/16
AG	29 3/4	36	50 1/8	54
CD	24 3/8	29 1/4	38 5/8	45
AJ	14 3/4	18 1/4	28 3/4	28 3/4
AK	13.500₂	13.500	22.000	22.000
BB	1/4	1/4	1/4	1/4
BD	16 1/2	20	30 1/2	30 1/2
BE	1	1 1/8	1 7/8	1 7/8
BF	11/16	11/16	1 1/16	1 1/16
XA	22 1/16	21 1/2	35 1/8	40
XA (3:1 & GREATER)	----	----	25 1/2	28 1/2
XB	----	14 3/4	26	26
XC	----	5/8-11NC	3/4-10NC	3/4-10NC
XD	2 1/2	3	3 3/4	5
BX MAX	2 3/16	2 3/4	4	4₁
WT LBS	580	1020	2280	3145

₁ - 4 1/4 Bore available in Model P8 at extra cost
₂ - P3 requires a discharge base opening of at least 9-1/4 diameter.